PJL/PCL PRINTER SUPPORT FOR Z88

This is a couple of work-in-progress files for printing to a network printer
from a Cambridge Z88.

You will need some sort of "modem" connected to your Z88 to provide network
access. I use https://github.com/benryves/RetroWiFiModem/

Transfer the PCL (Printer Command Language) printer driver and PJL.BBC
(Printer Job Language) files to your Z88. Use PrinterEd to load (<>FL) and
install (<>FU) the PCL driver.

Use the Z88's terminal to "dial" into your printer. You will need a raw socket
(rather than a Telnet client) and will need to connect to its raw TCP/IP
printer port (usually 9100).

With RetroWiFiModem this is indicated by prefixing the hostname with '-'.
For example, my printer is called SEC001599E0870C on the network so I dial
in with:

ATDT-SEC001599E0870C:9100

(To make my life easier, I stored a speed dial entry for the printer in
slot 4:

AT&Z4=-SEC001599E0870C:9100,PRINTER

...and now I can dial in by just typing ATDT PRINTER).

Once connected, run the BASIC program PJL.BBC to create a job on the printer.
This will start the job then prompt you to print the document. Switch to
whichever application you'd like to print from (e.g. PipeDream) and print
the document.

Finally return to BASIC and press [Enter]. This will finish the job and your
document should print.

KNOWN ISSUES

Some characters don't print, e.g. the pound sign. The printer driver does
select the "PCL ISO 8859/1 Latin 1" symbol set (0n) which puts the pound sign
at character $A3, same as the Z88, so I'm not sure why that doesn't work.

Font size changes (e.g. in superscript and subscript) don't take effect.

Changing to the alternate/user-defined font sets will change the font, but on
my printer this produces huge text with small fixed-width spacing, resulting
in overlapping characters.

Overall margins, paper size etc are not configured so the results are pretty
ugly at the moment!
